Metco Metalizing Gun

Metco metalizing gun uses a single wire that is entered in a jet flame. The temperature is close to 10,100 K, melting the metalizing wire. The air stream from the jet atomizes the molten particles, falling them onto the substrate.

The technological parameters, such as feedstock, flame spray gun gas composition, and flow rate, and energy input, play an important role in the relationship between the particles and the substrate.

Model Wire Diameter Wire Feeding Gasses Used
12P Zinc, Aluminum, Stainless Steel, Brass, Bronze, etc 3.17 mm Air (Pneumatic) O2, Propane or Acetylene
12P-ED Zinc, Aluminum, Stainless Steel, Brass, Ni-Al, Bronze, etc 1.6/2.3/3.17 mm Electric Motor O2, Propane, Acetylene, LPG
5-PK Molybdenum 1.6, 2.0, 2.3 mm Electric Motor O2, Propane or Acetylene
14P Zinc, Aluminum, Stainless Steel, Brass, Bronze, etc 3.17 mm Air (Pneumatic) O2, Propane/ Acetylene

A  flame spray gun system uses a combustible gas mixed with oxygen to create a flame outside of the spray gun of approximately 2230° C. This is the heat source to melt the metal to be sprayed. The material to be sprayed is in the form of a wire that falls into the center of the flame where it is melted.

Wire Flame Spray Gun

Wire flame spray gun technique uses metals and alloys in wire form as its spraying materials, and combustion flame or arc spray gun since its energy source. The molten metals are sprayed on the surface of the subject to make the coating. Every metals and alloy in wire form are ready for the material, such as copper, bronze, stainless steel, molybdenum, high carbon steel, and low melting point metals including zinc, aluminum, and others.

Once the wire is melted in the flame, the molten metal is atomized from a combination of the pressure from the flame and compressed air that is injected around the flame. The atomized molten metal now forms a  stream, similar in appearance to a spray paint pattern, except this is a liquid metal.

The molten stream of metal is deposited on the component to be layered at a thickness of .0005″ (.0127mm) per pass to .003″ (.0762 mm) per pass. The variation of thickness per pass is depended on the material being coated and the amount of heat build-up in the part being coated.

The complete system includes the combustion wire gun complete in a metal case, air flow meters, air trio, gas regulators, flashback arrestors, gas flow meters, and a wire stand.

Advantages Of Metco Metalizing Gun 

  • Non-conductive wires can be sprayed.
  • Less fine dust generated when spraying makes overspray light flammable or explosive.
  • More portable for on-site spraying.
  • Simple to ignite.
  • Easy to operate.
  • High spray rate with low gas consumption.
  • Low maintenance design reduces operating costs.
  • It can be used among both hard and soft wires series.
  • Extension modules for internal bore applications.

Metco Metalizing Gun price

Metco Metalizing gun price depends on the type of Metalizing gun. we provide all types of metalizing gun such as zinc spray gun, aluminum spray gun, flame spray gun, arc spray gun, Metco Metalizing gun in India. 

Metco Metalizing Gun Manufacturers

We are the Best metco metalizing gun manufacturers in India at a low price for sale. Ambica Enterprises also a manufacturer of the thermal spray gun, hvof gun, wire arc spray gun, flame spray gun, automatic sand blasting machine, shot blasting machine in India.

Metalizing Gun in India

Ambica Enterprises is the wholesaler of metalizing gun in India. we are the best manufacturer, supplier & exporter of metalizing gun, thermal spray gun, zinc spray gun in India with the best quality for sale.   


Recent Posts