Price Range : ₹ 1.50Lakh - 4.50Lakh
4.5 Star Rating by our Precious Clients
Leading Supplier & Exporter
The wet sand blasting cabinet or commonly known as Wet Blasting Cabinet uses a seal-less slurry pump to convert the abrasive media and water into a slurry mixture. This slurry mixture is then transferred or pumped directly to the abrasive blast gun where compressed air pressure moves the mixture with the desired pressure rating. When we are working with a suction-blast gun, it is simple to recognize, because it has two pipes attached to it, one providing compressed air and one vacuum pipe (abrasive blasting hose) is bringing media into the gun. sand blasting nozzle has simply one larger pipe to deliver a mixture of media particles and compressed air. Wet blasting Cabinet Price in India depends on work-piece size, If the work-piece size is small then need a small wet blasting cabinet. If the work-piece size will large then the wet blasting cabinets size will be large, so the cost will depend on the size of the blast cabinet. Sand blasting Cabinet Manufacturer can reduce cost as per component size
|Tungsten Carbide (8mm)
|Dust Collector Type
|Reclaimer, Fabric Bag
|3Ø, 1.5HP, 800CFM
The wet Shot blasting machine works on the suction principle as a suction blasting cabinet. The same gun is using in the Suction & Water Blasting operation. Abrasives/ Glass bead/ Aluminum Oxide mixed with water in this cabinet. Sludge is mixed by air bubbles for a constant flow of slurry (water + abrasive).
We mix particles (such as stone, glass, plastic, etc.), and liquids (mostly water but sometimes mixed with chemicals), then stir it equally until it becomes like muddy water. We call this "slurry". We hit this slurry at high speed by using an exclusive shoot nozzle and the power of compressed air. The speed rate is about 288-720km/hr (80-200m/s).
Ambica Enterprises is a leading manufacturer of Wet Blasting Cabinet in India at a low price.
Wet blasting cabinet in India. we are also a Manufacturer, Supplier & Exporter of Sand Blasting Machine, shot blasting machine, grit blasting machine, sand Blasting Cabinet, Suction Blasting Cabinet, sand Blasting Room, thermal spray gun, metalizing gun, zinc spray gun, arc spray gun, flame spray gun abrasive media, etc. Wet abrasive blasting removes coatings, contaminants, corrosion from hard surfaces. It’s similar to a dry sand blasting machine, except that the blast media is moistened prior to impacting the surface. The advantage of vapor abrasive blasting over sandblasting is that it reduces dust and allows the operators to work in a wide range of environments with minimum setup and costs.